Can you tell me the necessary settings required for a meterial Inspection
- Purchased as raw material, where some MICs are checked with every lot and some
are checked once a month. In a month there could be one lot or several lots (10
or 20 or 0 etc.)
You create necessary MICS. Then assign MICS to Inspn plan in QP01.
For those MICS which need inspn every lot (critical characs chk),do not enter
a dyn mod rule.
For those that need skip type inspn,say inspect first lot , if ok then skip
rest 29 lots (Asumption 1 lot per day,so 30 lots a
month)-for this u need to create rule using QDR1. & assign the rule into the
specific MIC in the inpn plan charac over view.
Also plan header need to be populated for dyn mod level at charac level &
rule.
